Simulation; Inputs And Outputs; A.9.12 Simulation - Siemens SITRANS F Operating Instructions Manual

Modbus communication
A.9 Modbus holding register tables
Modbus Data type /
register Size in bytes
11404 Unsigned / 2
11405 Unsigned / 2
...
11493 Unsigned / 2
A.9.12

Simulation

A.9.12.1

Inputs and outputs

Channel 2 output current
Table A-76 Channel 2 output current
Modbus Data type /
register Size in bytes
8825 Unsigned / 2
8826 Float / 4
162
Parameter Description
Register 1 Modbus register that
defines the parameter
to be logged. Only pa‐
rameter of type float or
unsigned can be log‐
ged.
65535: No logging
Register 2 Modbus register that
defines the parameter
to be logged. Only pa‐
rameter of type float or
unsigned can be log‐
ged.
65535: No logging
Register 90 Modbus register that
defines the parameter
to be logged. Only pa‐
rameter of type float or
unsigned can be log‐
ged.
65535: No logging
Parameter Description
Simulation Enables or disables
simulation of channel 2
output current.
Simulated value Current value that is
output on the channel
when simulation is ena‐
bled.
Default value Value range /
[unit] Setting options
(unit register)
65535 -
65535 -
65535 -
Default value Value range /
[unit] Setting options
(unit register)
0
● 0: Disabled
● 1: Enabled
0 0 - 25
[mA]
Operating Instructions, 09/2017, A5E41425845-AB
Access
level
Read /
write
Read /
write
Read /
write
Access
level
Read /
write
Read /
write
FST020 IP65 NEMA 4X