Safety Notes; Precondition For Use; Warning Symbols On The Device; Laws And Directives - Siemens SITRANS F Operating Instructions Manual

Safety notes

2.1

Precondition for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
2.2

Warning symbols on the device

Symbol
2.3

Laws and directives

Observe the safety rules, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
For CE marked equipment the device complies with the following directives:
● Low voltage directive LVD 2014/35/EU
● EMC directive 2014/35/EU
● Restriction of hazardous substances directive 2011/65/EC and 2015/863/EU
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
Explanation
Caution. The Caution symbol is used throughout the operating instructions.
2
13