Checking The Consignment; Further Information - Siemens SITRANS F Operating Instructions Manual

1.6

Checking the consignment

Check the device packaging for damage. Inform your supplier of any damage. Retain the
damaged parts for clarification.
Check the scope of delivery by comparing the shipping documents with your order for
correctness and completeness.
Do not take damaged or incomplete devices into operation under any circumstances.
Special conditions for storage and transportation of device listed in Section "Service and
maintenance (Page 57)".
Identification
Note
IMPORTANT
This device is NOT to be used in hazardous areas.
CE declaration is delivered with the device.
Transmitter model number is: FST020
The system ordering code represents the transmitter including accessories.
AC System ordering code: 7ME3570-1JA4XXXXXX
DC System ordering code: 7ME3570-1JB4XXXXXX
AC - Transmitter ordering code: 7ME3570 - 1JA40-0AA1
DC - Transmitter ordering code: 7ME3570 - 1JB40-0AA1
1.7

Further Information

Product information on the Internet
The Operating Instructions are available on the documentation disk shipped with the device,
and on the Internet on the Siemens homepage, where further information on the range of
SITRANS F flowmeters may also be found:
Product information on the internet (http://www.siemens.com/flow)
Worldwide contact person
If you need more information or have particular problems not covered sufficiently by these
Operating Instructions, get in touch with your contact person. You can find contact information
for your local contact person on the Internet:
Local contact person (http://www.automation.siemens.com/partner)
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
Introduction
1.7 Further Information
11