Process Value Filter Masks - Siemens SITRANS F Operating Instructions Manual

Modbus communication
A.9 Modbus holding register tables
Selected view type
Six diagnostic values
Alarm list
A.9.6.8

Process value filter masks

Table A-48
Selected view type
Process value filter mask 1
Process value filter mask 2
138
Setting options
● 10: Transmitter internal temperature
● 44: Ch2 value
● 45: Ch3 value
● 46: Ch4 value
● 50: Reynolds number
● 51: RxGain up path 1
● 52: RxGain down path 1
● 53: SNR upstream path 1
● 54: SNR downstream path 1
● 55: Sound velocity path 1
● 56: Delta time path 1
● 57: Path 1 percentage of bursts accepted
● 58: Actual sensor frequency path 1
● 59: Downstream peak amplitude path 1
● 60: Upstream peak amplitude path 1
No selections possible.
Process value filter masks
Setting options
Bit coded mask to specify the process values that are filtered. Bit set
means filtered:
● Bit 0: Mass flow
● Bit 1: Volume flow
● Bit 2: Density
● Bit 3: Medium temperature
● Bit 11: Totalizer 1
● Bit 18: Sound velocity
● Bit 19: Flow velocity
● Bit 21: Viscosity
Bit coded mask to specify the process values that are filtered. Bit set
means filtered:
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB