Audit Trail; Operating Time; Parameter Change Log; A.9.13 Audit Trail - Siemens SITRANS F Operating Instructions Manual

A.9.13

Audit trail

A.9.13.1

Operating time

Table A-82 Operating time
Modbus Data type /
register Size in bytes
6160 Unsigned / 4
6162 Unsigned / 4
A.9.13.2

Parameter change log

Table A-83 Parameter change log
Modbus Data type /
register Size in bytes
6650 Unsigned / 2
6651 Unsigned / 2
6652 Unsigned / 2
6750 Unsigned / 2
6751 String / 16
10832 String / 32
6759 Unsigned / 2
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
Parameter Description
Operating time Operating time of the
total transmitter.
Operating time Operating time of the
transmitter since last
startup.
Parameter Description
Newest entry Entry number of new‐
number est entry. Older entries
have a smaller entry
number.
(Wrap around for 0 -
100).
Available en‐ Current number of
tries available parameter
change log entries.
Clear parame‐ Command to clear the
ter change log parameter change log.
Entry number Selection of the entry
number.
Time stamp Time stamp of the pa‐
rameter change log en‐
try specified by Entry
number.
Format is YYYY-MM-
DD hh-mm.
Time stamp Time stamp of the pa‐
rameter change log en‐
try specified by Entry
number.
Format is YYYY-MM-
DD hh-mm-ss.
Modbus register Modbus register speci‐
fied by Entry number.
A.9 Modbus holding register tables
Default value Value range /
[unit] Setting options
(unit register)
- -
[h]
- -
[h]
Default value Value range /
[unit] Setting options
(unit register)
- -
- -
-
● 0: Cancel
● 1: Clear log
- 0 - 100
- -
- -
- -
Modbus communication
Access
level
Read
only
Read
only
Access
level
Read
only
Read
only
Write on‐
ly
Read /
write
Read
only
Read
only
Read
only
167