Simatic Pdm; Commissioning With Pdm; Introduction; Functions In Simatic Pdm - Siemens SITRANS F Operating Instructions Manual

SIMATIC PDM

C.1

Commissioning with PDM

C.1.1

Introduction

SIMATIC PDM is a software package used to commission and maintain process devices.
Procedure examples are for FST030. FST020 procedure is similar but screen shots will appear
different for FST020 Eectrical Device Description (EDD).
SIMATIC PDM is a software package used to commission and maintain process devices.
C.1.2

Functions in SIMATIC PDM

Note
- For a complete list of parameters, see the Function Manual.
- While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
SIMATIC PDM monitors the process values, alarms and status signals of the device. It allows
you to display, compare, adjust, verify, and simulate process device data; also to set schedules
for calibration and maintenance.
Parameters are identified by name and organized into function groups. See the Function
Manual for the complete HMI structure
PDM (Page 182) for more details.
See Parameters accessed via drop-down menus (Page 183) for parameters that do not appear
in the menu structure in SIMATIC PDM.
: The menu structure for SIMATIC PDM is almost identical to that for the HMI.
1)
C.1.3

Supported SIMATIC PDM versions

Note
Supported SIMATIC PDM versions
The EDD supporting this product is compatible with SIMATIC PDM v. 8.2 + SP1 and higher.
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
and Changing parameter settings using SIMATIC
1)
C
175