Wizard - Clamp-On Configuration; Wizard - Zero Point Adjustment - Siemens SITRANS F Operating Instructions Manual

C.1.9

Wizard - Clamp-On Configuration

Open the menu Device→Wizard→Clamp-On Configuration, and follow the steps.
The clamp-on configuration wizard takes the user through the necessary steps to install the
sensors to achieve proper operation.
C.1.10

Wizard - Zero point adjustment

Open the menu Device → Wizard → Inline Configuration, and follow the steps.
Although the device zero is very stable from the factory the user has the ability to remove any
residual zero offset that may exist by performing the Zero Point Adjustment wizard.
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
SIMATIC PDM
C.1 Commissioning with PDM
181