Honda Fourtrax Rancher AT 2004 Service Manual page 298

REAR WHEEL/ SUSPENSION
15-10
Remove the left pivot bolt using the commercially
available tool.
Remove the swingarm from the frame.
Remove the yoke joint.
INSPECTION
Remove the dust seals from the swingarm .
Check the dust seals for wear or damage.
Turn the inner race of each pivot bearing with your
finger.
The bearings should turn smoothly and quietly.
Also check that the outer race fils lightly in the swin-
garm pivot.
Replace them
if
necessary (page 15-11).
BEARINGS