Honda Fourtrax Rancher AT 2004 Service Manual page 106

LUBRICATION SYSTEM
5-18
Assemble the oil pump body Band C while aligning
the drive pin w ith the groove in the inner rotor C.
Install and tighten the o il pump assembly bolt to the
specified torque.
TORGUE: 6 N'm (0.6 kgf·m, 4.3 Ibf.ft)
Install the ojl pump driven sprocket onto the drive
shaft, then secure it with the snap ring.
Turn the oil pump shah and check for smooth oper-
ation.
Reassemble if
necessary.
INSTALLATION
Install the dowel pins.
Coat new O-rings with oil and install them into the
crankcase grooves.
BODY C
A's~;EMBlY
BOLT