Honda Fourtrax Rancher AT 2004 Service Manual page 101

INSTALLATION
Clean the oil strainer.
Install the oil strainer with its narrow side facing the
front crankcase cover.
Apply sealant to the mating surface of t he front
crankcase cover.
Apply clean engine oil to the new oil joint O-rings
and install them onto the oil joints.
Install the oil joints into the oil pump holes.
Apply clean engine o il to the new O·ring and install
it into the fro nt crankcase groove.
Install the dowel pins.
Install the front crankcase cover.
Install the wire clamp and front crankcase cover
bolts, tighten the bolts in a crisscro ss pattern in 2 - 3
steps.
Install the oil level gauge.
Install the automatic conlfol mOlor assembly (page
24-49).
Install t he all cooler pipes (page 5·24).
LUBRICATION SYSTEM
{DOWEl PIN
5-13