Honda Fourtrax Rancher AT 2004 Service Manual page 135

Connect the throttle cable to the throttle drum,
install the cable adjuster into the carburetor body
and temporarily tighten the lock nut.
Install the throttle drum cover while aligning it
groove with the boss on the carburetor body.
Install and tighten the throttle drum cover screw to
the specified torque.
TORQUE: 2 N'm (0.15 kgf·m, 1.1Ibf.ft )
Connect the carburetor heater 2P (Natural) connec-
tor.
Install the throttle stop control knob into the cable
clip and secure the clip.
FUEL SYSTEM
6-21