Assembling The Compressed Air Maintenance Unit - DURKOPP ADLER 867 Durkopp Adler

Setup
Operating Instructions 867 - 04.0 - 03/2018
7.13.1 Assembling the compressed air maintenance
unit
NOTICE
Property damage from incorrect setting!!
Incorrect system pressure can result in damage to the machine.
Ensure that the system pressure is set to 8 – 10 bar before

assembling the compressed air maintenance unit.

The following parts make up the compressed air maintenance unit:
• System connection hose (length 5 m, diameter 9 mm)
• Hose connectors and hose clamps
• Coupling socket and coupling plug
Information
The compressed air maintenance unit is available under part
number 0797 003031.
Proper setting
The system pressure for the pneumatic unit is 8 – 10 bar.
Fig. 77: Assembling the compressed air maintenance unit
①
(1) - Cross bar
(2) - System connection hose
6
4
8
2
10
0
(3) - Maintenance unit
(4) - Machine hose
④
③
②
127