DURKOPP ADLER 867 Durkopp Adler page 126

124
Fig. 75: Assembling and connecting the M-Control circuit board (2)
①
(1) - Upper section compressed air hoses
(2) - Compressed air supply hose
3. Connect the compressed air supply hose (2) to the compressed
air maintenance unit.
4. Assemble the upper section compressed air hoses (1) to the
throttle valves (4).
Important
If the function of the R and L buttons are swapped over on
machines with switchable needle bars, then the upper section
compressed air hoses (1) are swapped on the throttle valves (4).
5. Plug the electrical cable connectors into the connection
sockets (3).
④
(3) - Sockets
(4) - Throttle valves
Operating Instructions 867 - 04.0 - 03/2018
Setup
③
②