Setting The Working Height - DURKOPP ADLER 867 Durkopp Adler

Setup
Operating Instructions 867 - 04.0 - 03/2018
7.6

Setting the working height

WARNING
Risk of crushing from moving parts.
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal damage
if failing to comply with the ergonomic requirements.
Adjust the working height to the body height of the
person who will operate the machine.
The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the
tabletop).
Fig. 56: Setting the working height
(1) - Screw
To set the working height:
1. Loosen the screws (1) on the stand bars.
2. Set the tabletop to the desired height.
①
103