DURKOPP ADLER 867 Durkopp Adler page 32

30
For machines with thread clamp
13. Insert the needle thread through the right hole of the guide
above the thread clamp (16).
14. Insert the needle thread through the right hole of the guide
below the thread clamp (16).
Fig. 9: In 1-needle machines (3)
(16) - Thread clamp
15. Insert the needle thread into the thread clamp (16) from the
left so that the needle thread is held in place inside the hook
of the clamp.
The needle thread is supposed to run through the clamp almost
without touching it and in such a way that it only makes contact
with the guides above and below the thread clamp (16).
16. Insert the needle thread through the thread guide on the nee-
dle bar (13).
⑯
Operating Instructions 867 - 04.0 - 03/2018
Operation