Operation
Operating Instructions 867 - 04.0 - 03/2018
28. Insert the right needle thread through the needle eye of the
right needle in such a way that the loose thread end faces the
right hook.
29. Insert the left needle thread through the needle eye of the left
needle in such a way that the loose thread end faces the left
hook.
For machines with a short thread cutter
30. Pull the right and the left needle thread each through the nee-
dle eye until the loose thread end has a length of approx. 4 cm
with the thread lever (15) at the highest position.
Important
Check the thread length.
If the loose thread end is too long, the needle thread may be caught
by the hook and cause a disturbance. If the loose thread end is
too short, the machine cannot start sewing.
35