Pneumatic Sewing Foot Lift - DURKOPP ADLER 867 Durkopp Adler

Setup
Operating Instructions 867 - 04.0 - 03/2018
Fig. 78: Setting the operating pressure
①
(1) - Pressure controller
To set the operating pressure:
1. Pull the pressure controller (1) up.
2. Turn the pressure controller until the pressure gage (2)
indicates the proper setting:
• Increase pressure = turn clockwise
• Reduce pressure = turn counterclockwise
3. Push the pressure controller (1) down.

7.13.3 Pneumatic sewing foot lift

For information on how to assemble the pneumatic sewing foot
lift, refer to the  Additional Instructions 0791 867704.
②
(2) - Pressure gage
129