DURKOPP ADLER 867 Durkopp Adler page 75

Operation
Operating Instructions 867 - 04.0 - 03/2018
Initial situation
• Pedal position 0:
 Machine stationary, needles up, sewing feet down.
Positioning the sewing material
1. Press the pedal halfway back in pedal position -1:
 The sewing feet are lifted.
2. Push the sewing material into the initial position.
Sewing
1. Press the pedal forwards in pedal position +1:
 The machine sews.
The sewing speed increases the further forward the pedal is
pressed.
Interrupt sewing
1. Release the pedal in pedal position 0:
 The machine stops, needles and sewing feet are down.
Continue sewing
1. Press the pedal forwards in pedal position +1:
 The machine continues to sew.
Sewing over thicker parts of the material
1. Switch on the increased sewing foot stroke with the knee
button ( p. 59).
Changing the stitch length
nd
1. The 2 stitch length must be switched on using the quick
function button ( p. 62).
Increasing the thread tension
1. Switch on the additional tensioner using the quick function
button ( p. 64).
73