Table of Contents
Advertisement
8.8 Pneumatic connection
The pneumatic system of the machine and of the additional equipment
must be supplied with dry and oil-free compressed air. The supply
pressure must lie between 8 and 10 bar.
8.8.1 Assembling the compressed air maintenance unit
Fig. 73: Assembling the compressed air maintenance unit
(1) - Pressure controller
(2) - Pressure gage
To assemble the compressed air maintenance unit:
1. Connect the connection hose (3) to the compressed air supply using
108
NOTICE
Property damage from oily compressed air!
Oil particles in the compressed air can cause malfunctions of the
machine and soil the sewing material.
Ensure that no oil particles enter the compressed air supply.
NOTICE
Property damage from incorrect setting!
Incorrect system pressure can result in damage to the machine.
Ensure that the machine is only used when the system pressure is
set correctly.
①
a hose coupling R 1/4".
③
②
(3) - Connection hose
Operating Instructions 911-210 - 04.0 - 11/2016
Setup
Advertisement
Table of Contents
