40
7.
Fit the bobbin on the bobbin shaft (6).
8.
Turn the bobbin clockwise until it locks audibly into place.
9.
Pull the bobbin lever (5) up.
10. Switch on the machine ( p. 20).
11. Press the pedal forwards.
The machine sews while winding the hook thread from the
thread reel onto the bobbin.
When the bobbin is full, the machine automatically stops
winding. The winder lever (5) moves back down.
The cutter (7) is automatically moved to its vertical initial
position.
12. Remove the full bobbin from the bobbin shaft (6).
13. Tear off the thread behind the cutter (7).
You can now insert the full bobbin into the hook ( p. 41).
Operating Instructions 867 - 04.0 - 03/2018
Operation