Omron NJ Series Troubleshooting Manual page 73

Event code Event name
102B0000 hex Restore
(Ver. 1.03) Operation
Failed to
Start
102C0000 hex Restore
(Ver. 1.03) Operation
Failed
40170000 hex Safe Mode
(Ver. 1.03)
80230000 hex NX Message
(Ver. 1.05) Communica-
tions Error
NJ-series Troubleshooting Manual (W503)
Meaning Assumed cause
An error was • An SD Memory Card is not
detected in pre-exe- inserted.
cution checks for a
• The SD Memory Card type is
restore operation.
not correct.
• The format of the SD Memory
Card is not correct.
• There are no backup files on
the SD Memory Card.
• Either the backup files on the
SD Memory Card are corrupted
or required data is not in the
backup files on the SD Memory
Card.
• The unit version of the CPU
Unit to which to restore the files
is older than the unit version of
the backup files on the SD
Memory Card.
• The model of the CPU Unit to
which to restore the files is not
the same as the model of the
CPU Unit of the backup files on
the SD Memory Card.
• Recovery was executed for the
SD Memory Card.
• The CPU Unit is write-pro-
tected.
• The settings in the restore com-
mand file (RestoreCom-
mand.ini) are not correct.
• A backup operation is in prog-
ress.
• Synchronization, online edit-
ing, or the Clear All Memory
operation is in progress.
• The online connection with the
Sysmac Studio was discon-
nected.
• Reading the data for restoration
failed because the SD Memory
Card is faulty or not formatted
correctly.
• The SD Memory Card is dam-
aged.
The restore opera- • It was not possible to read the
tion ended in an data to restore.
error.
• The SD Memory Card was
removed during a restore oper-
ation.
• Failed to restore Unit or slave.
• The SD Memory Card is dam-
aged.
The Controller • The power supply was turned
started in Safe ON to the Controller when Safe
Mode. Mode was set on the DIP switch
on the CPU Unit.
An error has • The communications cable is
occurred in mes- broken.
sage communica-
• The communications cable con-
tions.
nector is disconnected.
• The NX message communica-
tions load is high.
3 Error Tables
Level
Maj Prt Min Obs Info
S NJ-series
CPU Unit
Hardware
User's Manual
(Cat. No.
W500)
NJ-series
CPU Unit Soft-
ware User's
Manual (Cat.
No. W501)
S Same as
above.
S Same as
above.
S Same as
above.
Reference
3
3-11