Omron NJ Series Troubleshooting Manual page 135

Event code Event name
57290000 hex Track Option
(Ver. 1.06) Structure ON
Compensa-
tion Setting
Out of Range
572A0000 hex Track Option
(Ver. 1.06) Structure
OFF Com-
pensation
Setting Out of
Range
572B0000 hex Number of
(Ver. 1.06) Array Ele-
ments in
Switch Struc-
ture Variable
Out of Range
572C0000 hex Number of
(Ver. 1.06) Array Ele-
ments in Out-
put Signal
Structure
Variable Out
of Range
572D0000 hex Number of
(Ver. 1.06) Array Ele-
ments in
Track Option
Structure
Variable Out
of Range
572E0000 hex Numbers of
(Ver. 1.06) Elements in
Output Sig-
nals and
Track Option
Arrays Not
Matched
57310000 hex Same Track
(Ver. 1.06) Number Set-
ting in Switch
Structure Out
of Range
NJ-series Troubleshooting Manual (W503)
Meaning Assumed cause
The value of • The value of the member of the
OnCompensation structure variable that was
that is specified in specified for the in-out variable
the TrackOptions in- of the instruction is out of
out variable to a range.
motion control
instruction is out of
range.
The value of Off- • The value of the member of the
Compensation that structure variable that was
is specified in the specified for the in-out variable
TrackOptions in-out of the instruction is out of
variable to a motion range.
control instruction is
out of range.
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the Switches of range.
in-out variable to a
motion control
instruction is out of
range.
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the Outputs of range.
in-out variable to a
motion control
instruction is out of
range.
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the of range.
TrackOptions in-out
variable to a motion
control instruction is
out of range.
The arrays in the • The arrays in the output signal
structure variables structure variable and track
that are specified option structure variable that
for the Outputs and are specified for the in-out vari-
TrackOptions in-out ables to the instruction do not
variables to a have the same number of ele-
motion control ments.
instruction do not
have the same
number of ele-
ments.
The same track • The same track number was
number was speci- specified more than the allow-
fied more than the able number of times for the
allowable number of TrackNumber in the Switches
times for the Track- in-out variable to a motion con-
Number in the trol instruction.
Switches in-out
variable to a motion
control instruction.
3 Error Tables
Level
Maj Prt Min Obs Info
S NJ-series
Motion Con-
trol Instruc-
tions
Reference
Manual (Cat.
No. W508)
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
Reference
3
3-73