Omron NJ Series Troubleshooting Manual page 190

3 Error Tables
Event code Event name
74930000 hex TIMING input
error
74940000 hex RESET input
error
74950000 hex ZERO input
error
74960000 hex ZEROCLR
input error
3-128
Meaning Assumed cause
TIMING input pro- • TIMINGx input turned ON in the
cessing was not FUN mode.
executed correctly.
• TIMINGx input turned ON or
OFF while RESETx input was
ON.
• TIMINGx input turned ON in a
non-measurement state.
• TIMINGx input turned ON
before the "delay time + sam-
pling time" elapsed.
RESET input pro- • RESETx input turned ON in the
cessing was not FUN mode.
executed correctly.
ZERO input pro- • ZEROx input turned ON in the
cessing was not FUN mode.
executed correctly.
• ZEROx input turned ON in a
non-measurement state.
• ZEROx input turned ON for a
task whose status is OFF.
ZEROCLR input • ZEROCLRx input turned ON in
processing was not the FUN mode.
executed correctly.
Level
Maj Prt Min Obs Info
S ZW-CE1@T
Confocal Fiber
Type Displace-
ment Sensor
User's Manual
(Cat. No.
Z332)
S Same as
above.
S Same as
above.
Same as
S
above.
NJ-series Troubleshooting Manual (W503)
Reference