Introduction; How To Obtain Parts - Fluke 9100 Series Service Manual

INTRODUCTION

This section provides an illustrated parts list for the 9100A-017 Vector
Output I/O Module. Components are listed alphanumerically by assembly.
Both electrical and mechanical components are listed by reference
designation. Each listed part is shown in an accompanying illustration.
The parts lists contain the following information:
o Reference Designator
o Description
o Fluke Stock Number
o Federal Supply Code for Manufacturers (MFRS SPLY CODE)
o Total Quantity of Components per Assembly (TOT QTY)

HOW TO OBTAIN PARTS

Components may be ordered directly from the manufacturer's part number, or
from the John Fluke Manufacturing Co., Inc., or an authorized
representative by using the Fluke Stock Number. In the event the part
ordered has been replaced by an new or improved part, the replacement
will be accompanied by an explanatory note and installation instructions
if necessary.
To ensure prompt and efficient handling of your order, please include
the following information:
o Quantity
o Fluke Stock Number
o Description
o Reference Designation
o Printed circuit assembly (PCA) number and revision letter
o Instrument Model Number and Serial Number
Parts price information is available from the John Fluke Manufacturing
Co., Inc. or its representative. Prices are also found in the Fluke
Replacement Parts Catalog, which is available on request.
An asterisk in the "S" (static) column indicates a device
or component subject to damage by static discharge.
4/List of Replaceable Parts
CAUTION
4-3