Table of Contents
Advertisement
Description of the unit
3.3.4 Core temperature measurement
20
QualityControl
The extended QualityControl cooking function enables the control
system to detect by itself the loading volume and to adjust the
particular cooking parameters in autoChef. This ensures that there is
always first-class quality.
After-cooking button
The After-cooking button allows the cooking process to continue for a
previously defined time, after the cooking program has elapsed.
Time2Serve
Using the extended Time2Serve cooking function, different products
can be ready to serve at the same time.
The serving time is specified. The Combisteamer gives a message,
when a remaining cooking time for a product is reached. A signal
sounds and the food to be cooked is loaded in succession during an
active cooking process. The cooking time is reduced and resources
saved.
ClimaSelect plus
The extended ClimaSelect plus cooking function optimises the
climate in the cooking zone. Steam is introduced in small stages, and
the climate can be controlled individually.
When using core temperature measurement, the temperature inside
the food being cooked is measured by means of a core temperature
sensor.
As soon as the target core temperature is reached, the cooking
process is ended automatically or, in the case of a multi-step cooking
program, the next cooking step starts.
The use of core temperature measurement offers the following
benefits:
•
Reduced energy and water consumption
•
No overcooking
•
Less weight lost by the food being cooked
•
High HACCP safety
Operating instructions
Advertisement
Table of Contents
