Table of Contents
Advertisement
5.6.14 Setting the rest stage
INFORMATION
Requirements Automatic cooking menu open
4. Tap the Target injection quantity field.
The Settings window is displayed.
5. Using a wiping gesture, set the rollers to the desired value.
Upwards or downwards, injection quantity is increased or
reduced.
6. Tap the Confirm button.
The Settings window is closed.
Manual humidification is set.
The Insert rest stage function is possible at any time.
Without saving, the stage only applies to the current cooking program.
a
b
Image: Window for Insert rest stage
a Start button
Cooking program selected
1. Select the New step function.
2. Tap the Rest stage field.
The Manual cooking menu appears.
3. Configure the settings.
Set the cooking mode.
Set the temperature.
Set the time.
Set the moisture.
4. Tap the "Start" button.
Rest stage is added to the current program.
Rest stage is not saved in the cooking program.
Operating instructions
Operating the unit
b Rest stage field
59
Advertisement
Table of Contents
