Henny Penny FlexFusion PLATINUM COMBI Operation Manual page 55

6. Select the desired rack.
7. Configure the desired settings and confirm (see "Setting cooking
time" and "Setting core temperature").
8. Configure the settings for further racks as required.
9. Tap the "Start" button in the information bar.
RackControl2 is started.
RackControlEnding 2
b
a
Image: Ending RackControl2 window early
a Continue field
b Stop button
Requirements RackControl2 started
Preheating temperature not reached
1. Tap the RackControl2 window.
2. Open the next page with an upwards wiping gesture.
3. Tap the Continue field.
RackControl2 starts with the actual temperature.
RackControl2 for selected rack is set.
The display changes to "Actual display".
The unit heats up.
The "Start" button is replaced with the "Stop" button.
d
The last Settings display is shown.
Preheating is interrupted.
Operating instructions
Operating the unit
c
c Settings window
d Rack field
55