Sagem Ultima 600 Maintenance Manual page 6

S
Ref.: 21821085-0/A
FIGURES AND DRAWINGS
SECTION 2
Figure 2.1 - ULTIMA 600 in its package
Figure 2.2 - ULTIMA 600 with cardboard box removed
Figure 2.3 – Accessory box
Figure 2.4 – Storage compartment for documents supplied with unit
Figure 2.5 – Installing the printer paper
Figure 2.6 - ULTIMA 600 / Rear panel
Figure 2.7 – Installing gas sampling sensor
Figure 2.8 – Power up
Figure 2.9 – Pre-heating screen
SECTION 3
Figure 3.1 - ULTIMA 600 / Front panel
Figure 3.2 – 6-key keypad
Figure 3.3 – Sequence of screens to reach self-test
Figure 3.4 - ULTIMA 600 / Rear panel
Figure 3.5 – Pneumatic circuit
SECTION 4
Figure 4.1 – Tightness test – Display screens
Figure 4.2 – HC residue test – Display screens
SECTION 5
Figure 5.1 – Internal component locations
Figure 5.2 – Connector locations
Figure 5.3 – Cleaning and replacement of pump seal
SECTION 8
Issue 05/99 1-6