Section 5 Corrective Maintenance; Software; Point Adjustment Test - Sagem Ultima 600 Maintenance Manual

S

5.1 - SOFTWARE

5.1.1 - 1 point adjustment test:

• Connect a keyboard.
• Start up the ULTIMA 600 in Function mode: under code (Technician selftest – pressure
upper arrow on power up).
• Select the CODE function
Standby screen in
technician
mode
•
Validate (key <>).
• Enter the secret code.
• Select the GAS function
using the s or t key.
• Validate the function (key <>).
• Select the SELFTEST
using the s or t key.
• Validate the function (key <>).
Issue 02/99
SECTION 5
CORRECTIVE MAINTENANCE
selftest
ULTIMA 600
OPF
OBD
CODE
OBD
SERVICE
ULTIMA 600 ASD
xxxxx
Secret code entry
GAS
GAZ
ULTIMA 600
OFP
OBD
Dnload
Service
GAS:
SELFTEST
Service
Ref.: 21821085-0/A
ASD
5-1