Sagem Ultima 600 Maintenance Manual page 35

S
- HGV/LV configuration
• Select the "Config. HGV/LV" function
using the s or t key.
• Validate the function (key <>).
The secret code for the
HGV/LV configuration is:
1 2 0 0
or the keys of the ULTIMA unit
This code is permanent
Select the vehicle type
using the s or t key.
You can chose between:
"Heavy goods vehicle" or "Light vehicle"
- Print configuration
This function is used to configure
automatic printing at the end of the test
if the result is good and (or) if the result
is bad.
• Select the "Config. Print" function using
the s or t key.
• Validate the function (key <>).
Using the s or t keys, change the cell which
flashes; use the
selection.
Issue 05/99
keys to change the
Ref.: 21821085-0/A
Temperature
Version, CS
K = 0,00 m
Cell status
T = - - °C
RPM = 000 rpm
Conf. HGV/LV Config.PL/V
Configuration
* * * *
Secret code entry
Vehicle type
Display of choices:
Heavy goods vehicle
Version, CS
Cell status
K = 0,00 m
Conf. HGV/LV
T = - - °C
Config. Print. RPM = 000 rpm
Results printing
Good
Automatic
600-85
-1
HGV/LV
600-85
-1
Bad
No
4-13