Downloading The Software - Sagem Ultima 600 Maintenance Manual

S
5.1.5 – Downloading the software:
• Connect a microcomputer using the RS 232 link at the rear of the unit.
• Connect a keyboard.
• Start up the ULTIMA 600 in Function / code mode: (Technician selftest – press upper
arrow on power up).
• Start up the microcomputer.
• On the ULTIMA 600, select Downloading using the s or t key.
"Downloading"
selected
•
Confirm entry to Downloading mode (key <> ).
•
Enter the operator identification
#01 DD/MM/YYYY xxxx yyy
.
#01 : Downloading order No.
. DD/MM/YYYY: Downloading date
. xxxx : Site performing downloading
(SD72 = Factory, UD18 = ED, ASD = ASD)
. yyy : Initials of family name and first name of person performing downloading.
. zzzzzz : Software version installed (V02.00)
Issue 05/99
GAS
OFP
OBD
DNLOAD
TELECH
SERVICE
zzzzzz
Ref.: 21821085-0/A
ULTIMA 600
5-14