Downloading A New Boot And A Provisional Application - Sagem Ultima 600 Maintenance Manual

S
Note: The memory is formed by an upper memory part and a lower memory part. Only the
lower memory can be erased. The upper part is protected in order to restart in the
event of a power cutout or a problem. However, this part can be accessed by a
special procedure if necessary should a major change be required.
5.1.6 – Downloading a new boot and a provisional application
Perform the same procedure as in 5.4.1 until the following error message is displayed:
V01.10c
BOOT 01
• Start up under code
• Select the "Downloading" mode
• Enter the downloading data.
• Download file BOOTINI01.TXT
BOOT INIT 01
BOOT 01
C
• Press
• Select Boot downloading
• Download file BOOT02.TXT
BOOT INIT 01
BOOT 02
Issue 05/99
Chk = DE97
Chk = D37C
CAUTION – Software loaded is
incompatible.
Change file and start
Again
Downloading successful
Chk D37C
Start xxxxx
Downloading successful
Chk 6A57
Start xxxxx
Ref.: 21821085-0/A
←
End yyyyy
End yyyyy
5-16