Disassembly Of Rear Cover - Sagem Ultima 600 Maintenance Manual

S
5.2.3 – Disassembly of rear cover
Tools:
• Cutting pliers
• Screwdriver
Procedure:
1. Remove the lead seal at the rear of the unit (cutting pliers).
2. Unscrew the 2 x 3 screws securing the rear protective cover.
3. Remove the 6 screws from the upper cover.
4. Remove the 3 nuts and washers (dia. 5.5) under the rear cover.
5. Remove the rear cover.
6. Assemble by performing disassembly procedure in reverse order.
Internal component locations
Analysis
cell link
Screen
links
Keyboard
links
Pwr sply
links
Pwr sply
unit
Pump
Issue 05/99
Figure 5-1 – Internal component locations
Ref.: 21821085-0/A
O cell
2
Analysis
cell
Solenoid valve
Pump power supply
Mains filter
5-20