Xerox AltaLink B80 series User Manual page 219

Maintenance
5. Pull out the used fuser module.
6. Unpack the new fuser module. Retain the packaging.
7. Insert the new fuser module as shown.
8. To fasten the fuser module, rotate the orange thumbscrews clockwise.
9. Place the used fuser module in the packaging that shipped with the new fuser module.
10. Close the left side door of the printer. Reconnect the printer to the power cord, then power on the
printer.
Xerox ® AltaLink ® B80XX Series Multifunction Printer 219
User Guide