This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.
See
Table 1 on page
3.1 Front Panel
The following figures show the front panels of the NSW.
Figure 12 Front Panel: NSW100-10P
Figure 13 Front Panel: NSW100-10
Figure 14 Front Panel: NSW100-28P
Figure 15 Front Panel: NSW100-28
Figure 16 Front Panel: NSW200-28P
3.1.1 Gigabit Ethernet Ports
See
Table 1 on page
The NSW has 1000Base-T auto-negotiating, auto-crossover Ethernet ports. In 10/100/1000 Mbps Gigabit
Ethernet, the speed can be 10 Mbps, 100 Mbps or 1000 Mbps. The duplex mode can be half duplex or
full duplex.
Hardware Panels
8, for detailed information about port features of the NSW Series.
8, for detailed information about port features of the NSW Series.
NSW Series User's Guide
19
C
H A P T E R
3