Hardware Panels; C Ha Pte R 3 Ha Rdwa Re Pa Ne Ls; Front Panels - ZyXEL Communications GS1100 Series User Manual

This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.
3.1 Fro nt Pa ne ls
You can use either crossover or straight-through cables for all the ports.
Refer to Section Table 1 on page 8
The following figures show the front panels of the Switch.
Figure 11 GS1100-10HP (Revision B1)
GS1100-10HP
Fig ure 12
GS1100-16 REVISION B1 (PART No.: GS1100-16-EU0103F, GS1100-16-US0103F)
Fig ure 13
GS1100-24E REVISION B1 (PART No.: GS1100-24E-EU0103F, GS1100-24E-US0103F)
Fig ure 14
GS1100-24 REVISION B1 (PART No.: GS1100-24-EU0103F, GS1100-24-US0103F)
Fig ure 15
Ha rdwa re Pa ne ls
for more information on hardware differences between models.
GS1100 Series User's Guide
19
C
HA PTER
3