Erase Running-Configuration; Save Configuration - ZyXEL Communications NSW Series User Manual

Table 15 Management > Maintenance (continued)
LABEL
Save
Configuration
Reboot System
Tech-Support

8.2.1 Erase Running-Configuration

Follow the steps below to remove the running configuration on the NSW. Unlike when you reset the NSW
to the factory defaults, the username, password, system logs and memory logs are not removed.
In the Maintenance screen, click the Click Here button next to Erase Running-Configuration to clear all
1
NSW configuration information you saved.
Click OK to remove the running configuration on the NSW.
2
Figure 41 Erase Running-Configuration: Confirmation
In the web configurator, click the Save button in the top of the screen to make the changes take effect.
3

8.2.2 Save Configuration

Click Config 1 to save the current configuration settings permanently to Configuration 1 on the NSW.
Click Config 2 to save the current configuration settings permanently to Configuration 2 on the NSW.
Alternatively, click Save on the top right-hand corner in any screen to save the configuration changes
to the current configuration.
Note: Clicking the Apply or Add button does NOT save the changes permanently. All
unsaved changes are erased after you reboot the NSW.
Chapter 8 Maintenance
DESCRIPTION
Click Config 1 to save the current configuration settings to Configuration 1 on the NSW.
Click Config 2 to save the current configuration settings to Configuration 2 on the NSW.
Click Config 1 to reboot the system and load Configuration 1 on the NSW.
Click Config 2 to reboot the system and load Configuration 2 on the NSW.
Click Factory Default to reboot the system and load the default configuration settings on the
NSW.
Note: Make sure to click the Save button in any screen to save your settings to the
current configuration on the NSW.
Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds for
log reports and download related log reports for issue analysis. Log reports include CPU history
and utilization, crash and memory.
NSW Series User's Guide
47