ZyXEL Communications NSW Series User Manual page 35

Figure 32 Basic Setting > System Info
The following table describes the labels in this screen.
Table 7 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the NSW for identification purposes.
Product Model This field displays the product model of the NSW. Use this information when searching for firmware
upgrade or looking for other support information in the website.
ZyNOS F/W This field displays the version number of the NSW 's current firmware including the date created.
Version
Ethernet This field refers to the Ethernet MAC (Media Access Control) address of the NSW.
Address
CPU Utilization CPU utilization quantifies how busy the system is. Current (%) displays the current percentage of
CPU utilization.
Memory Memory utilization shows how much DRAM memory is available (Total (byte)) and in use (Used
Utilization (byte)). It also displays the current percentage of memory utilization (Utilization (%)).
Hardware Monitor
Temperature The NSW has temperature sensors that are capable of detecting and reporting if the
Unit temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature BOARD, MAC and PHY refer to the location of the temperature sensors on the NSW printed circuit
board.
Current This shows the current temperature at this sensor.
Chapter 6 Basic Setting
NSW Series User's Guide
35