6.1 Overview
This chapter describes how to configure the System Info, IP Setup, and Port Setup screens.
See
Table 5 on page 30
6.1.1 What You Can Do
• Use the System Info screen
• Use the IP Setup screen
device, and the management VLAN ID.
Carefully manage the IP address of the NSW Series to ensure
management connectivity with the NCC.
• Use the Port Setup screen
6.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen as shown. Use this screen
to view general system information. You can check the firmware version number.
for menu differences of the NSW Series.
(Section 6.2 on page
(Section 6.3 on page
36) to configure the NSW IP address, default gateway
(Section 6.4 on page
NSW Series User's Guide
34
C
H A P T E R
Basic Setting
34) to check the firmware version number.
37) to configure the NSW port settings.
6