Vlan Details; Vlan Configuration - ZyXEL Communications NSW Series User Manual

Table 10 Advanced Application > VLAN: VLAN Status (continued)
LABEL
The Number of
Search Results
Index
VID
Elapsed Time
Status
Change Pages

7.2.1 VLAN Details

Use this screen to view detailed port settings and status of the VLAN group. Click on an index number in
the VLAN Status screen to display VLAN details.
Figure 36 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
Table 11 Advanced Application > VLAN > VLAN Detail
LABEL
VLAN Status
VID
Port Number
Elapsed Time
Status

7.3 VLAN Configuration

Use this screen to view IEEE 802.1Q VLAN parameters for the NSW. Click Advanced Application > VLAN >
VLAN Configuration to see the following screen.
Chapter 7 VLAN
DESCRIPTION
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the Search button to look for certain VLANs.
This is the VLAN index number. Click on an index number to view more VLAN details.
This is the VLAN identification number that was configured in the Static VLAN screen.
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the NSW.
Static: added as a permanent entry
Click Previous or Next to show the previous/next screen if all status information cannot be seen in
one screen.
DESCRIPTION
Click this to go to the VLAN Status screen.
This is the VLAN identification number that was configured in the Static VLAN screen.
This column displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the NSW.
Static: added as a permanent entry
NSW Series User's Guide
41