Transmitter Pv Display; Table 5 Transmitter Pv Display; Table 6 Pv Engineering Units - Honeywell OneWireless XYR 6000 User Manual

5.3

Transmitter PV display

The following information is displayed in sequence for the first channel, second channel, etc. then
repeating continuously unless another display mode (see Transmitter display modes on page 21) is
selected.
Item displayed
Channel number
PV value
PV engineering units
PV status
Device status
Engineering units
Deg C
Deg F
mV
Ohm
Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual
6/24/08

Table 5 Transmitter PV Display

Example
1 Channel number 1, 2, or 3
350 Latest PV value.
DEG F See Table 6 on page 23.
BAD See Table 7 on page 24. If PV status is not
displayed then the PV value is good.
LOW BATT See Table 8 on page 24.
If multiple device status messages are in effect,
they are displayed one message per channel
until all messages have been displayed.
If no device status is displayed then the device
status is normal.

Table 6 PV engineering units

Degrees Celsius
Degrees Fahrenheit
Millivolts
Ohms
5.3. Transmitter PV display
Details
Description
5. Operation
23