Field Setting From Remote Controller; Wired Remote Controller - Daikin RZQ Series FCQ20EVA Service Manual

Field Setting from Remote Controller

2. Field Setting from Remote Controller

Individual function of indoor unit can be changed from the remote controller. At the time of installation or after
service inspection / repair, make the field setting in accordance with the following description.
Wrong setting may cause error.
(When optional accessory is mounted on the indoor unit, setting for the indoor unit may be required to
change. Refer to information in the option handbook.)
2.1

Wired Remote Controller

2.1.1 BRC1C61/BRC1D61
SECOND
CODE NO.
FIRST
CODE NO.
1. When in the normal mode, press the "
MODE is entered.
2. Select the desired MODE NO. with the "
3. During group control, when setting by each indoor unit (mode No. 20, 22 and 23 have been selected),
press the "
when setting by group.)
4. Press the "
5. Press the "
6. Press the "
7. Press the "
(Example)
If during group setting and the time to clean air filter is set to FILTER CONTAMINATION, HEAVY, SET
MODE NO. to "10" FIRST CODE NO. to "0", and SECOND CODE NO. to "02".
51
UNIT NO.
3
1 7
6
" button (3) and select the INDOOR UNIT NO to be set. (This operation is unnecessary
" upper button (4) and select FIRST CODE NO.
" lower button (5) and select the SECOND CODE NO.
" button (6) once and the present settings are SET.
" button (7) to return to the NORMAL MODE.
TEST
4
2
5
" button for 4 seconds or more, and the FIELD SETTING
TEST
" button (2).
SiME281501E
MODE NO.
FIELD
SETTING
MODE
Field Setting