Daikin RZQ Series FCQ20EVA Service Manual page 97

SiME281501E
Service Diagnosis
Normal status
Enters inspection mode from normal
status when the INSPECTION/TEST
button is pressed.
1 Press INSPECTION/TEST button.
When MODE selector
button is pressed or no
button is pressed for 1
minute, equipment
returns to normal status.
Troubleshooting by Remote Controller
If no button is pressed
for 1 minute, equipment
returns to normal status.
If no button is pressed
for 1 minute, equipment
returns to normal status.
5 Press MODE selector button.
3
Press
MODE
selector
button.
88