Daikin RZQ Series FCQ20EVA Service Manual page 19

SiME281501E
15 ACTION ICONS
These icons indicate the actions for each day of the
schedule timer.
OFF
16 OFF ICON
This icon indicates that the OFF action is selected
when programming the schedule timer.
17 INSPECTION REQUIRED
These icons indicate that inspection is required.
Consult your installer.
18 SET TEMPERATURE DISPLAY
This indicates the current set temperature of the
installation (not shown in LIMIT operation or in FAN or
DRY mode).
SETTING
19 SETTING
Not used, for service purposes only.
20 AIRFLOW DIRECTION ICON
This icon indicates the airflow direction (only for
installations with motorised airflow flaps).
21 NOT AVAILABLE
NOT
is displayed whenever a non-installed option
AVAILABLE
is addressed or a function is not available.
22 FAN SPEED ICON
This icon indicates the set fan speed.
DEFROST/HOTSTART MODE ICON
23
This icon indicates that the defrost/hotstart mode is
active.
24 AIR FILTER CLEANING TIME ICON
This icon indicates the air filter must be cleaned.
Refer to the manual of the indoor unit.
25 ELEMENT CLEANING TIME ICON
This icon indicates the element must be cleaned
(Heat Reclaim Ventilator only).
26 VENTILATION MODE BUTTON
The ventilation mode button operates the Heat
Reclaim Ventilator; refer to the Heat Reclaim
Ventilator manual for more details.
27 VENTILATION AMOUNT BUTTON
This button sets the ventilation amount; refer to the
Heat Reclaim Ventilator manual for more details.
28 INSPECTION/TEST OPERATION BUTTON
Not used, for service purposes only.
29 PROGRAMMING BUTTON
This button is a multi-purpose button.
Depending on the previous manipulations of the user,
the programming button can have various functions.
Remote Controller
1 2 3 4 5
and
NOT
AVAILABLE
L H HH
TEST
30 SCHEDULE TIMER BUTTON
This button enables or disables the schedule timer.
31 TIME ADJUST BUTTON
These buttons are used to adjust the clock or, when in
programming mode, to adjust the programmed action
time. Both buttons have an auto-repeat function.
32 TEMPERATURE ADJUST BUTTONS
These buttons are used to adjust the current setpoint
or, when in programming mode, to adjust the
programmed setpoint temperature (step = 1˚C). Both
buttons are also used to adjust the day of the week.
33 OPERATION CHANGE/MIN-MAX BUTTON
max
min
This button is a multi-purpose button. Depending on
the previous manipulations of the user, it can have
following functions.
1 select the operation mode of the installation
(FAN, DRY, AUTOMATIC, COOLING, HEATING)
2 toggle between minimum temperature and
maximum temperature when in limit operation
34 SETPOINT/LIMIT BUTTON
This button toggles between setpoint, limit operation
OFF
or (programming mode only).
35 FAN SPEED BUTTON
This button toggles between L (Low), H (High), HH
(very High), (Automatic).
36 AIRFLOW DIRECTION ADJUST BUTTON
This button enables to adjust the airflow direction.
37 AIR FILTER CLEANING TIME ICON RESET
BUTTON
This button is used to reset the air filter cleaning time
icon.
Wired Remote Controller
3P107422-3D
10