Removing The Scanner Cover Unit; Removing The Speaker - Canon LaserBase MF5600 Service Manual

Chapter 3
3.1.20.12 Removing
Operation Panel Unit
1) Remove the two screws [1].
2) Disengage the claw [3] on the rear right side of the
operation panel unit [2] and lift it up.
removing the two flat cables, remove the operation
panel unit.
[1]
[2]
F-3-198
3.1.20.13
Removing
Scanner Cover Unit
1) Remove the platen glass cover.
2) Remove the three screws [1].
3) Disengage the front claw [2] and the three claws on
the sides [3]. Lift up the scanner cover unit [4] a
little to disengage the other two claws [5]. Then
remove the scanner cover unit.
[5]
[3]
[1]
[2]
[1]
F-3-199
3-46
the
0006-3770
After
[3]
the
0006-3771
[4]
[3]
3.1.20.14 Removing
Speaker
1) Disengage the speaker cable [1] from the cable
guide.
[1]
F-3-200
2) Remove the two screws [1] of the speaker cover [2]
from the lower side of the scanner unit.
Although the scanner unit is turned over in the
illustration, you should not turn over it when you
perform this operation because the CCD unit might
fall down.
[1]
F-3-201
3) Remove the speaker cover and the speaker from the
lower side of the scanner unit.
the
0006-3767
[2]