Removing The Control Panel Unit(Lbp3560/6750Dn); Preparation; Procedure - Canon imageCLASS LBP6780dn Service Manual

3
Disassembly/Assembly > Controller System > Removing the Control Panel Unit(LBP3560/6750dn) > Procedure

Removing the Control Panel Unit(LBP3560/6750dn)

■ Preparation

1) Remove the Right Cover.(Refer to page 3-17)

■ Procedure

1) Remove the Upper Right Rear Cover [1].
• 2 Claws [2]
x2
2) Release the cable from the Wire Saddle [1], disconnect the connector [2], and remove the
screw (silver) [3] and screw (tapping) [4].
3 Disassembly/Assembly > Controller System > Removing the Control Panel Unit(LBP3560/6750dn) > Procedure
[1]
[2]
F-3-48
[4]
[3]
[1] [2]
F-3-49
3) Remove the Control Panel Unit [1].
• 2 Claws [2]
x2
[2]
NOTE:
The following shows the 2 claws [1] of the Control Panel Unit.
[1]
3-28
[1]
F-3-50
F-3-51
3-28