Config | Utility; Figure 6-5. Config | Utility Page - Comtech EF Data MBT-5000 User's Installation And Operation Manual

MBT-5000 L-Band Up/Down Converter System
Ethernet-based Remote Product Management
6.5.5.3.2

Config | Utility

Use this page to configure MBT-5000 operating parameters.
Date and Time
•
You may enter a date in the form MM/DD/YY (where MM = month [01 to 12], DD = day [01
to 31], and YY = year [00 to 99]).
•
You may enter a time using HH:MM:SS format (where HH = hour [00 to 23], MM = minutes
[00 to 59], and SS = seconds [00 to 59]).
Click [Change Date/Time] to save.
Circuit ID
Enter a Circuit ID string of up to 48 characters, and then click [Change CID] to save.
Current Active Firmware Image (read-only)
This section identifies the selected Current Active Firmware Image. In this example, Image 2 is
the Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select Reboot Image 1 or 2. Press [Submit] when done.
Perform Soft Reboot
Click [Reboot Now] to reboot the MBT-5000 using the Current Active Firmware Image.

Figure 6-5. Config | Utility page

6–18
MN-MBT5000
Revision 4