Comtech EF Data MBT-5000 User's Installation And Operation Manual page 48

MBT-5000 L-Band Up/Down Converter System
Upgrading Firmware
2) Next, create a temporary folder (subdirectory) on the user PC for the firmware archive
download.
•
•
There are several ways to create a temporary folder on a Windows-based PC:
A. Use the Windows Desktop to create and rename the temporary folder.
•
Right-click anywhere on the desktop to open the popup submenu, and then select
New > Folder to create a temporary folder on the desktop.
•
Right-click on the new folder and then select "Rename" from the popup submenu.
Rename this folder to "MBT5000" or some other convenient, unused name.
B. Use Windows Explorer to create and rename the temporary folder.
•
Select File > New > Folder to create a temporary folder. This creates the new folder
in the active folder.
•
Right-click the "New Folder" folder name, and then rename this folder to
"MBT5000" or some other convenient, unused name:
C. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
•
Select [Start] on the Windows taskbar, and then click the Run... icon. This opens the
'Run' window.
•
Click [Browse] in the 'Run' window. This opens the 'Browse' window.
Drive letter "c:" is used in these examples. Any valid, writable drive letter can
be used.
Typical for all tasks: Type the command without quotes , and then press Enter
to execute.
4–4
MN-MBT5000
Revision 4