Rj-45, Rj-48 Cable Connections - Comtech EF Data MBT-5000 User's Installation And Operation Manual

MBT-5000 L-Band Up/Down Converter System
Rear Panel Connections
Connection Instructions: Orient the plug to the receptacle in the proper position. Press firmly
into place. Use the jack screws to secure the plug to the receptacle jack nuts. Do not over-
tighten.
3.1.3

RJ-45, RJ-48 Cable Connections

The plug for an RJ-45 or RJ-48 cable features a flexible tab. The RJ-45 or RJ-48
jack features a mating slot. This design configuration assures proper
installation and pin orientation.
Connection Instructions: Press down the tab on the cable plug, and then
insert the plug into the RJ-4x jack. The connection is complete when the tab
'clicks' into position inside the jack.
3–4
MN-MBT5000
Revision 4