Table of Contents
Advertisement
6.5.5.3.2 Config | Utility
Use this page to configure MBT-5000A operating parameters.
Date and Time
•
Enter a date in the form MM/DD/YY (where MM = month [01 to 12], DD = day [01 to 31],
and YY = year [00 to 99]).
•
Enter a time using HH:MM:SS format (where HH = hour [00 to 23], MM = minutes [00 to
59], and SS = seconds [00 to 59]).
Click [Change Date/Time] to save.
Circuit ID
Enter a Circuit ID string of up to 48 characters, and then click [Change CID] to save.
Current Active Firmware Image (read-only)
This section identifies the selected Current Active Firmware Image. In this example, Image 2 is
the Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select Reboot Image 1 or 2. Press [Submit] when done.
Ethernet-based Remote Product Management
MBT-5000A L-Band Up/Down Converter System
Figure 6-7. Config | Utility Page
6–20
Revision 1
MN-MBT-5000A
Advertisement
Table of Contents
